MULTIFUNCTIONAL FLOOR CLEANING MACHINE

A floor scrubber that makes cleaning floors easier than it's ever been before.

And the absolute best solution when cleaning floors with crevices, what a game changer

For first time cleaning if we're not using a floor scrubber, we'll need to ....

1. Apply SHYN degreaser onto the floor 

2. Purchase the floor tool and a floor magic eraser 

3. You'll use the tool like a mop to lift and remove the grime, then in between cleaning you'll need to rinse the sponge out, releasing the grime for the sponge to do its's job.

4. Then you'll purchase a mop, bucket and pole, and you'll remove the chemical residue left behind using your wet mop, every 1/2 a room you'll empty the bucket of water and renew it, until the floor is completed.

5. It roughly takes 30 minutes per room.

With this floor scrubber, you'll need to do this....

1. For a really dirty, built up floor, apply SHYN degreaser onto the floor with your flat mop.

2. For a dirty floor but not too bad you'll add 1/2 a cup into the tank

3. You'll fill up the tank with HOT water, you'll push a button and walk while your scrubber, scrubs, washes and vacuums the floors. 

AND THAT'S IT, IT'S REALLY THAT SIMPLE 

WHY IT'S AMAZING FOR REGULAR CLEANING 

- It cleans 100% more than your mop ever wilL

- It works on all floors 

- It vacuums up water immediately

- It scrubs, cleans and vacuums up the water in one go  

- You'll never need to hire a tile cleaner ever again

- You'll never need to get on your hands and knees to clean ever again, unless it's little baby tight spots

WHY IT'S AMAZING FOR FIRST TIME CLEANING 

- It's faster than manually cleaning 

- It's easier than manual cleaning 

- It gets into the crevices like you would on your hands and knees with a toothbrush

- All you have to do is stand and walk while holding the handles and directing the machine.

- The clean you're able to achieve will blow you away 

FACTS ABOUT THE MULTIFUNCTIONAL FLOOR CLEANING MACHINE 

 - 12 months warranty

- Servicing is done here in sydney  within a 48 hour turnaround, and very easy to replace any parts 

- Brush type /  Dual disk

- Solution tank /  4 litres 

- Up to 80 minutes run time 

- Brush power / 8 kilos 

- Cleaning width / 430mm

- Squeegee width / 450mm

- Recovery tank / 6.5 l ( this is where the dirty water goes in)

- Battery / 36V/84h

- Charge time 2-3 hours 

- Weight 17kg 

- The floor cleaning machine is heavy for people that find it difficult to lift 17 kilos when lifting the machine up a flight of stairs. It's awkward to carry up a lot of stairs, but definitely doable.

- If you don't empty the dirty water & it moves past the max line (the water will go into the vacuum) you'll need to pay roughly $120 for our technician to come out and fix it. The bottles we stock now are clear so you can see the water line through the always 

- If the machine is laid down with water in it, the water will go into into the vacuum and you'll need to pay for our technician to come out and fix it for you.

- The machine stands up on in an upright position, when it's time to clean you drop the bottom and begin cleaning, when your finished, you stand it back up again. It's simple but it's new.   

- When cleaning really really dirty floors you'll need to add some extra water onto the floor, it makes the cleaning faster.

- When cleaning really really dirty floors you'll need to walk extremely slow with the machine, the bristles need to scrub and remove all grime in every crevice, you can't do it fast, this might be a challenge for some of you :)

- For regular cleaning you don't need to apply any product or water onto the floor it will be mixed up in your solution tank the product and water will come out and clean as you go.

 SERVICE AND MAINTENANCE 

- Our technician will come directly to your home if your located in sydney the call out fee is $120, plus parts if required 50% of the time it can be fixed on site or will be taken back to our factory and handed back fixed within 72 hours.

OR you can drop it into one of our sydney locations to be fixed without the travel cost, it will be labour only based on $52.00 ph

- The Water pump to replace cost $78.00

- The brushless motor to replace cost $260.00

- The battery cost to replace is $325

- The handle of the machine to replace costs $78.00

- The vacuum motor cost to replace $130.00

- Clear water tank $130.00

- The floor wheels $39.00 

Parts that need to be changed more frequently 

The squeegee rubbers $78.00 

The pair of brushes both hard or soft $78.00

WARRANTY 

- One year warranty will cover the motor, vacuum motor, water pump and the touch pad 

DIRECTIONS ON HOW TO USE 

For bad condition flooring 

1. Apply SHYN degreaser onto the floor using your mop or wall tool 

2. Fill your solution tank with very hot water 

3. For heavy build up drop some extra water on the built up areas, then clean over it with the floor cleaning machine, and again move slowly.

3. Turning the machine on, Press the water, scrubber and vacuum buttons, and walk very slow until the floor is pristine.

4. Make sure your solution tank is never empty it needs to be filled with water.

5. Make sure you empty the water before it hits the max line

6, Enjoy your beautifully clean floor 

For Regular floor cleaning  

1. Fill your solution tank with very hot water and a few caps of SHYN degreaser

2. Turning the machine on, Press the water, scrubber and vacuum buttons, and walk slowly but not as slow as the first clean. Remember the more the bristles agitate the cleaner your floors will be.

3. Make sure your solution tank is never empty it needs to be filled with water.

4. Make sure you empty the water before it hits the max line

5. Enjoy your beautifully clean floor