A LITTLE SURPRISE IN EVERY ORDER
AFTERPAY AVAILABLE
FREE SHIPPING OVER $250

SHYN Wall Cleaning Tutorial

by Samantha Campbell in ALL THINGS WALLS

For Painted Walls (No Tiles)
Achieve streak-free, fresh-looking walls in minutes using the SHYN Wall Cleaning Bundle!

🛒 Grab the full bundle here:
👉 https://shop.shyn.com.au/products/wall-cleaning-bundle

What You’ll Need:

  • SHYN Wall & Floor Tool

  • 2 or more Agitator Microfibre Pads

  • SHYN Degreaser

  • 1 bucket with a 50/50 mix of SHYN Degreaser + water

  • 1 bucket with clean water (for rinsing)

 Step-by-Step Instructions:

1. Mix Your Solution
Fill one bucket with a 50/50 mix of SHYN Degreaser and water. In another bucket, prepare clean water for rinsing pads.

2. Apply the Degreaser
Dip your first agitator pad into the degreaser mix. Wring it out well so it’s damp, not dripping.
Attach the pad to your SHYN Wall & Floor Tool and wipe across the wall using straight horizontal strokes to apply the product and loosen grime.

3. Rinse and Remove Grime
Swap to a second clean agitator pad. Dip it in clean water, wring it out, and use it to go over the same area (again with horizontal strokes). This removes residue and lifts the dirt.

4. Maintain Clean Pads
After each wall:

  • Rinse both pads thoroughly before reusing

  • Or swap to fresh, clean pads to keep moving quickly

Pro Tips:

  • No need to dry — the pad leaves a clean, streak-free finish on its own.

  • Have at least 4–6 pads on hand for larger homes or extra dirty walls.

  • For tough marks, use a SHYN Magic Eraser after applying the degreaser solution.

  • Always spot-test on delicate surfaces or matte paint before doing a full wall.

Related Posts

How to Remove Mould on Walls

If you’re dealing with mould on your walls, here’s a proven method using the SHYN system that not only kills the mould but helps prevent it from returning:  What You’ll Need: SHYN Mold Pro SHYN Degreaser 2+ Agitator Microfibre Pads (minimum — more if working across large areas) 1x Power Scrub Pad (non-scratch) 12L Bucket (for mixing) Clean water Optional: Magic Eraser (for leftover staining) Step-by-Step Instructions: 1. Kill the MouldSpray SHYN Mold Pro directly onto the mould-affected wall, or apply it using the agitator pad attached to your floor tool for safer, faster coverage with less product in the air.🕒 Let it sit for 10 minutes to kill the mould spores completely. 2. Remove the BuildupMix SHYN Degreaser and water at a 50/50 ratio in your bucket. Dip a clean agitator pad into the solution and apply it to the wall. Use a Power Scrub Pad (non-scratch) to agitate and break down any residue, mould particles, and buildup. 3. Wipe CleanUse a separate agitator pad that has been fully soaked in clean water — not just damp.💧 It’s important the entire pad is wet so it effectively lifts all product residue off the wall without leaving behind streaks or chemical buildup. 🌀 After every wall or section, rinse out the used pad thoroughly to remove any residue from SHYN Degreaser or mould particles.Or keep 5–10 clean agitator pads ready to swap in for a faster workflow. 4. Let It DryAllow the wall to fully air dry to eliminate any remaining moisture and reduce the risk of mould returning. 5. Final Touch (Optional)If light staining remains, gently use a Magic Eraser to reduce the discoloration — but go carefully on painted surfaces to avoid damage. Note: If mould has permanently stained the paint, cleaning won’t reverse it — repainting may be necessary. 🛒 Shop the Wall Cleaning Essentials: Find all the recommended products here:👉 https://shop.shyn.com.au/collections/bathroom-walls-ceilings-wall-tiles

Learn more
Home Search Cart Products Find our locations