If you’re dealing with mould on your walls, here’s a proven method using the SHYN system that not only kills the mould but helps prevent it from returning:
What You’ll Need:
-
SHYN Mold Pro
-
SHYN Degreaser
-
2+ Agitator Microfibre Pads (minimum — more if working across large areas)
-
1x Power Scrub Pad (non-scratch)
-
12L Bucket (for mixing)
-
Clean water
-
Optional: Magic Eraser (for leftover staining)
Step-by-Step Instructions:
1. Kill the Mould
Spray SHYN Mold Pro directly onto the mould-affected wall, or apply it using the agitator pad attached to your floor tool for safer, faster coverage with less product in the air.
🕒 Let it sit for 10 minutes to kill the mould spores completely.
2. Remove the Buildup
Mix SHYN Degreaser and water at a 50/50 ratio in your bucket. Dip a clean agitator pad into the solution and apply it to the wall.
Use a Power Scrub Pad (non-scratch) to agitate and break down any residue, mould particles, and buildup.
3. Wipe Clean
Use a separate agitator pad that has been fully soaked in clean water — not just damp.
💧 It’s important the entire pad is wet so it effectively lifts all product residue off the wall without leaving behind streaks or chemical buildup.
🌀 After every wall or section, rinse out the used pad thoroughly to remove any residue from SHYN Degreaser or mould particles.
Or keep 5–10 clean agitator pads ready to swap in for a faster workflow.
4. Let It Dry
Allow the wall to fully air dry to eliminate any remaining moisture and reduce the risk of mould returning.
5. Final Touch (Optional)
If light staining remains, gently use a Magic Eraser to reduce the discoloration — but go carefully on painted surfaces to avoid damage.
Note: If mould has permanently stained the paint, cleaning won’t reverse it — repainting may be necessary.
🛒 Shop the Wall Cleaning Essentials:
Find all the recommended products here:
👉 https://shop.shyn.com.au/collections/bathroom-walls-ceilings-wall-tiles