A LITTLE SURPRISE IN EVERY ORDER
AFTERPAY AVAILABLE
FREE SHIPPING OVER $250

Using SHYN Grime Lifter

by Samantha Campbell in PRODUCT KNOWLEDGE

Watch grime liquefy and lift off effortlessly.

SHYN Grime Lifter is a powerful grime-removing powder that breaks down thick, caked-on grease and fat, turning it into a thin, liftable layer you can rinse away with ease.

If you’ve ever stared at a filthy rangehood filter, stained BBQ tray, or greasy light fitting wondering how to clean it without scrubbing for hours — this is your answer.

Just mix with hot water, soak your item, and watch the grime melt away.
No elbow grease required.

What You Can Use It On:

  • Rangehood filters (liquefies thick fat buildup)

  • Stovetop racks and oven trays

  • Barbecue grills and hot plates

  • Greasy light fittings and ceiling fan blades

  • Metal ornaments and hardware

  • Air-conditioner filters

  • Nicotine-stained items or Venetian blinds

  • Heavily soiled clothes, rags, and work uniforms

  • Outdoor tools and metal parts

If it’s grimy and safe to soak — SHYN Grime Lifter can handle it.

How to Use SHYN Grime Lifter:

  1. Mix
    Add 1 scoop of SHYN Grime Lifter per 1L of warm to hot water. Stir until fully dissolved.

  2. Soak
    Submerge the item completely in the solution:

    • Light grime (e.g., filters, fabrics): Soak for 2–3 minutes.

    • Heavy grime (e.g., BBQ trays, racks): Soak for 40 minutes or longer.

    You’ll see grime begin to break down, loosen, and float to the surface — with little to no scrubbing.

  3. Rinse
    Take the item out and rinse thoroughly under running water.

    • Tip: A little dishwashing liquid helps remove any remaining residue.

Tips for Best Results:

  • Hot water speeds up the grime-lifting process.

  • Stir well to dissolve powder fully before soaking.

  • Agitate the item in the soak occasionally for stubborn grime.

  • Rinse thoroughly and follow up with dish soap if needed.

  • Always wear gloves — this product can strip natural oils from your skin.

  • Avoid inhaling the powder while handling.

What Not to Soak:

SHYN Grime Lifter is designed for durable items. Avoid using it on:

  • Plastic oven or stovetop control knobs

  • Imitation gold, brass-look, or decorative electroplated finishes

  • Painted or printed plastics

  • Soft plastic or glued-on labels

These materials can warp, discolour, or become damaged in hot water with strong cleaning agents.
If unsure, patch test or clean these items separately by hand.

Tags: grime lifter shyn grime lifter
Previous Post Next Post

Related Posts

Dos and Don'ts for Cleaning Wool

DOs for Cleaning Wool Read the label first: Always check for specific care instructions like “dry clean only” or “machine washable wool.” Use lukewarm or cold water: Heat can cause wool to shrink or felt. Use wool-safe detergent: Look for pH-neutral, enzyme-free detergents designed for wool (e.g., Woolmark-approved). Hand wash gently: Swirl or press lightly in water—never scrub or rub. Use the gentle or wool cycle in the machine: Only if the label says it's safe to machine wash. Place in a mesh laundry bag: If machine washing, this reduces friction and damage. Rinse thoroughly: Make sure all detergent is out to avoid residue or stiffness. Dry flat: Lay the item on a clean, dry towel and reshape it as it dries. Store properly: Fold and store wool in a cool, dry place—ideally with cedar to deter moths. ❌ DON’Ts for Cleaning Wool Don’t use hot water: It can shrink and felt wool permanently. Don’t use regular detergent or bleach: These are too harsh and will damage the fibres. Don’t wring or twist wool: This stretches and distorts the shape. Don’t tumble dry: Wool should always air dry to prevent shrinkage and felting. Don’t hang wet wool garments: They will stretch out of shape. Don’t ignore stains: Spot-treat gently before washing so they don’t set. Don’t leave soaking too long: 10–20 minutes max—longer can weaken the fibres.

Learn more

SHYN Shoe Magic Erasers

A double-strength melamine block designed to remove grime, dirt, and scuff marks from non-fabric shoe surfaces. Best for rubber soles and midsoles. Works even better when paired with SHYN Degreaser. What It’s For Use when shoes have visible dirt, scuffing, or grime buildup — especially on: White sneakers (rubber areas only) Rubber soles & midsoles Crocs, slides, thongs School shoes Plastic/rubber detailing (non-fabric) What Not to Use It On Avoid using on: Fabric, mesh, or canvas Leather, suede, or glossy finishes Painted trims or delicate areas (unless patch tested) Over-scrubbing — it can wear the material How to Use Soak the eraser in water until fully saturated. Squeeze out excess — must be wet, not damp. Glide over dirty surface — no need for pressure. Rinse eraser when dirty and continue. Let the shoe air dry. Pro Tip Spray SHYN Degreaser on soles or tough spots before using the eraser. This breaks down heavy grime and speeds up the process. Other Notes Each block lasts up to 20 uses (depending on grime level) No chemicals, no residue Results in seconds

Learn more

SHYN Paste

The secret weapon for hard water stains, surface rust, and stubborn marks. When nothing else works — SHYN Paste does.Made from natural ingredients and proudly Australian-made, SHYN Paste is designed to restore surfaces and lift grime that’s too tough for regular cleaners. It’s clay-based, non-toxic, and about 30–40% stronger than Gumption and 30% stronger than marble paste — giving you professional-grade results without damage. From kitchen grime to bathroom build-up, scuff marks to limescale — SHYN Paste brings surfaces back to life. What It’s Made For: Remove Hard Water Stains & Thin Limescale:Designed to break down mineral deposits around taps, drains, shower glass, and fixtures. Treat Surface Rust:Lifts light rust marks from chrome, sinks, and fittings without scratching. Restore Chrome and Silver:Revives dull or stained tapware, handles, and metal fixtures with a natural shine. Remove Scuff Marks:Erases black marks on doors, skirting boards, trims, and walls (safe on glossy finishes — may dull matte or low-sheen paint, so patch test first). Lift Stains from Glass and Stainless Steel:Removes surface discoloration, light grime, and stubborn buildup. Brighten White Grout:Brings tile grout back to life by removing surface grime and revealing the original color. Cut Through Build-Up on Tiles:Works on both floor and wall tiles to remove soap scum, grime, and mild staining. Where SHYN Paste Gets Used Most: You won’t use it every day — but when you need it, nothing else compares. Rangehoods:Cuts through thick, greasy buildup that degreasers and erasers can’t fully shift. Chrome Element Covers:Restores the finish and removes rust-like surface marks. Stainless Steel Stovetops:Lifts water spots, light rust, and discoloration — ideal for tough areas around burners. Stone Benchtops:Gently removes turmeric stains and surface grime (always patch test first). Kitchen Sinks (Stainless):Clears off rust, grime, and water streaks for a full refresh. Walls, Doors & Skirting Boards:Removes black scuffs and grime — best on glossy trims and doors. Avoid matte-painted walls unless tested first. Showers:Use on glass, tiles, frames, and fixtures to cut through years of soap scum and water stains during your first deep clean. Silver Fixtures:Restores shine to tarnished areas gently and effectively. Ceiling Fan Blades (Especially White):Removes black dust marks and stuck-on grime without damaging the finish. Glass & Windows:Cuts through surface marks, limescale, and years of buildup where cloths and water fall short. How to Use It Properly: SHYN Paste is clay-based, which means it needs to stay present on the surface during cleaning.Don’t underuse it — many people make the mistake of applying too little. Apply a visible layer and let it sit momentarily to break down grime before scrubbing or wiping. Always use a non-scratch cloth or sponge, and follow up with a wet SHYN Ultimate Microfibre Cloth, then dry with the SHYN Drying Cloth for best results. Patch Testing & Surface Safety Because every surface is different — and you don’t always know its true condition — it’s essential to always do a patch test first. On painted surfaces and stainless steel, SHYN Paste can leave fine scratches if scrubbed too hard. The harder you scrub, the more likely it is to dull the finish or leave micro-scratches.Used correctly and gently, it performs beautifully — just don’t overdo the pressure. Why People Love It: Made from natural, non-toxic ingredients Stronger and safer than common pastes Australian owned and made No harsh smell or chemical irritation Brings back results that most people thought were ruined

Learn more

Leave a comment

Please note, comments need to be approved before they are published.

Home Search Cart Products Find our locations