A LITTLE SURPRISE IN EVERY ORDER
AFTERPAY AVAILABLE
FREE SHIPPING OVER $250

How To Clean The Oven Shell

by Samantha Campbell in Cleaning Guides

Safe Oven Cleaning Tutorial (Step by Step)

Step 1: Remove Loose Debris

Take out the oven racks and remove any crumbs, burnt food, or loose debris from inside the oven.

Step 2: Razor Blade for Stubborn Build-Up

Use a razor blade to carefully scrape away the thick, baked-on grime.
Tip: You can spray SHYN Degreaser first to soften the debris before scraping, or scrape first and then spray—it depends on how heavy the build-up is.

Step 3: Apply SHYN Degreaser

Spray SHYN Degreaser generously inside the oven.

Agitate with a steel scrub to break down grease and soften grime.

Remove loosened debris with a clean, damp SHYN Ultimate Microfibre Cloth.

Step 4: Deep Scrub with SHYN Paste

Apply SHYN Paste with your steel scrub.

Agitate the area to lift off stubborn stains.

Wipe away residue with a wet SHYN Ultimate Microfibre Cloth.

Step 5: Finishing Touch

Do a final wipe with a clean, damp microfibre cloth to remove any leftover product.

Dry the inside thoroughly with a SHYN Drying Cloth.

⏱️ On average, this safer method takes about 1 hour for a full oven clean.

The Faster (But Harsher) Way

There’s a quicker method that some people use—spraying a caustic oven cleaner, covering it with cling wrap for 1.5 hours, and then wiping it out with a clean microfibre cloth.

⚠️ I don’t recommend this because:

It can damage cupboards if not protected properly.

Inhaling fumes can cause serious health issues.

Contact with skin can result in burns.

That’s why in this video, I’m showing you the safer system instead—the one I use and trust.

✅ With this method, your oven will be clean, safe, and ready to use—without the risks.

 

Tags: how to clean an oven Oven cleaning
Previous Post Next Post

Related Posts

How to clean mould on walls

So with mould there are two parts: Killing the mould spores – that’s where Aeris Mould Pro comes in. It kills and prevents mould regrowth in wet areas 3-4 weekly in dry areas 12 months at a minimum. Removing the stain left behind – once mould dies, it often leaves a stain on fibro or painted surfaces. To deal with that: For patches only: Use a SHYN Magic Eraser + SHYN Degreaser to gently lift the stain off the wall. Another option is applying a light coat of bleach, for larger areas using a Wall & Floor Tool is easier, leave it for around 30 minutes, then rinse/wipe off using a clean damp Microfibre pad. (Just be aware bleach can sometimes affect paintwork, so always test a small patch first.) This way you’re not only removing the look of it, but also making sure the mould is actually gone so it doesn’t just come back.

Learn more

Your Daily (and Weekly) Floor Cleaning Guide

Don't vacuum the hard floors until you've removed the dust and debris with a flat microfibre pad on a tool like our wall and floor tool. Why? Because the vacuum doesn't pick up the dust, it picks up what you can see, why not just pick up everything using the microfibre pad and vacuum or sweep up the pile?  An Easier, safer ,and more effective way to clean. If you're using the same tool and a microfibre pad to wash the floor follow these steps for a streak-free clean. Textured, laminate, hybrid, and timber flooring - Use the microfibre pad on the wall & floor tool or your flat mop but make sure the whole thing is wet and squeezed out (you fold it to squeeze the water out).  Glide over the surface 3 times and continue. Change the pad after each room. The floor will dry streak-free by itself. Shiny & high gloss flooring - This can go two ways: Streaky, a nightmare, or perfect. 1st option - Wet the pad & squeeze out once you clean the floor, you may need another dry & clean pad to dry the floor. OR 2nd option - Make one line of water in the middle of the pad, so the whole microfibre pad is not wet. And glide over the surface 3 times. If the floor is really dirty the whole pad must be wet otherwise, the pad won't deliver the results we want, and it will feel exhausting. But if it's too wet, it will leave streaks. You can always purchase the SHYN Drying Pad in case this happens, you'll just wipe over the surface with the pad attached to the tool, the water will absorb like a drying cloth, but we don't have to get on our hands and knees.

Learn more

Glass Cleaner Lies: What's Really Making Your Glass Dirty

Why are you using glass cleaners? You're spending money for no reason. Every time you use it, it costs you money when it doesn't need to. Ammonia, alcohols, and surfactants which are in glass cleaners, leave behind a thin layer of residue that acts like sticky tape for dust and grime. Making the surface dirtier, faster. Why breathe in chemicals when you can avoid it? Be more thoughtful of your health. What I recommend Simply wipe the surface in 2 wipes with a wet SHYN Microfibre Cloth, and wipe dry in one wipe using the SHYN Drying Cloth. These cloths will last you 250 washes, about 2 years.  It's that simple What Sets SHYN Microfibres Apart Most microfibre cloths just smear dirt around because they’re made with a flat weave that can’t hold much. Our SHYN Ultimate Microfibre is made with a loop terry weave - thousands of tiny loops that grab and trap dirt instantly, picking up to four times more in one wipe. That means faster cleaning & less effort, and no chemicals. And when it comes to drying? Our SHYN Drying Cloth isn’t even microfibre — it’s a unique blend of bamboo, polyester, and polyamide that absorbs water in one wipe, covers a larger surface (50 x 40 cm), and leaves no streaks or lint behind. Once you try it, you’ll never go back to a “normal” cloth, reducing your cleaning time by more than half, and it keeps cleaner for longer.

Learn more
Home Search Cart Products Find our locations