Don't vacuum the hard floors until you've removed the dust and debris with a flat microfibre pad on a tool like our wall and floor tool.
Why? Because the vacuum doesn't pick up the dust, it picks up what you can see, why not just pick up everything using the microfibre pad and vacuum or sweep up the pile? An Easier, safer ,and more effective way to clean.
If you're using the same tool and a microfibre pad to wash the floor follow these steps for a streak-free clean.
Textured, laminate, hybrid, and timber flooring - Use the microfibre pad on the wall & floor tool or your flat mop but make sure the whole thing is wet and squeezed out (you fold it to squeeze the water out).
Glide over the surface 3 times and continue. Change the pad after each room.
The floor will dry streak-free by itself.
Shiny & high gloss flooring - This can go two ways: Streaky, a nightmare, or perfect.
1st option - Wet the pad & squeeze out once you clean the floor, you may need another dry & clean pad to dry the floor. OR
2nd option - Make one line of water in the middle of the pad, so the whole microfibre pad is not wet. And glide over the surface 3 times. If the floor is really dirty the whole pad must be wet otherwise, the pad won't deliver the results we want, and it will feel exhausting. But if it's too wet, it will leave streaks.
You can always purchase the SHYN Drying Pad in case this happens, you'll just wipe over the surface with the pad attached to the tool, the water will absorb like a drying cloth, but we don't have to get on our hands and knees.