Skip to product information
1 of 1

SHYN PRODUCTS

AERIS MOULD PRO

AERIS MOULD PRO

Regular price $19.95
Regular price Sale price $19.95
Sale Sold out
Tax included. Shipping calculated at checkout.
Size

Aeris Mould Pro™ is a powerful triple action cleaner that is designed to tackle and prevent mould regrowth. Unlike other mould removal products or home remedies, Aeris Mould Pro™ works in three ways to not only eliminate visible mould but also remove most stains caused by mould and prevent regrowth. It is suitable for use on a wide range of surfaces including walls, floors, tiles, carpets, curtains, and lounges. As with any cleaning product, it is important to always read the label and follow the directions for use to ensure safe and effective cleaning.

DIRECTIONS

It is important to follow the manufacturer's instructions carefully when using Aeris Mould Pro™ to ensure proper usage and safety. Before using the product, ensure that the area to be treated is well-ventilated and free from any clutter. Make sure to wear appropriate protective gear, including gloves, goggles, and a ventilated mask, as well as disposable protective coveralls.

To use the product, apply it on the surface to be treated and allow it to penetrate the mould for at least 10 minutes. This will ensure that the mould is dead and can be easily wiped away. Use a clean microfibre cloth or microfibre pad to remove any visible mould and the remaining residue. Once the surface has been cleaned, allow it to dry completely.

When using Aeris Mould Pro™ around mould, it is also important to take steps to prevent the spread of spores. This can be done by spraying the spores with the product and then allowing the room to ventilate with a window open or using an air purifier to clean the air in the room. This will prevent the dead spores from floating into the air and being ingested into the body.

Overall, Aeris Mould Pro™ is an effective product for cleaning and disinfecting hard surfaces where mould, mildew, and biofilm are visible. However, it is important to use the product safely and to follow the manufacturer's instructions carefully to ensure proper usage and safety.

TOOLS TO APPLY MOLD PRO 

The wall and floor tool attached is the agitator pad, is the tool required to apply the mold pro onto walls, ceilings. wall tiles and even windows 

Spray directly on mold on, window frames, shoes, clothes, plugs, grout, silicon & soft furnishings  

Apply on blinds with a microfibre cloth

POTENTIAL LIABILITIES 
  1. For suede surfaces, it's best to test a small patch first before applying the spray.

  2. To prevent run marks on painted surfaces, we recommend using a wall pad instead of spraying the solution directly.

  3. If you're treating a leather lounge, it's important to apply the spray with a cloth to avoid leaving run marks on the surface.

  4. After you've finished using Mold Pro, remove the trigger, give it a rinse out and put it back on. If the product dries over the holes, the holes will block and the bottle won't be able to ventilate causing it to leak.
COMMON ENQUIRIES
  1. Is there a noticeable odor when using the spray? While there is a slight scent, it is typically not overwhelming unless used excessively.

  2. Does the spray contain peroxide? Yes, it contains a small amount (5%) of peroxide.

  3. Will Mold Away remove black stains from silicone and grout? If the mold is only on the surface, then yes, it should effectively remove it. However, if the stain has set in, it may not be as effective.

  4. How long will the mold stay away for? When applied in wet areas, we recommend re applying every 7 days, for walls, ceilings etc , if the room is ventilated and cleaned properly, it won't come back. Research gives us 12 months the mold won't come back.    

 



 

View full details